LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> B3000 SE Regular Cab 4WD V6-3.0L OHV >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair

Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM) REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.




2. Disconnect the PCM connector.




3. Remove the two nuts and PCM cover.
4. Remove PCM.
5. Install in reverse order of removal.
scientia non olet · About LEMON Manuals